RC/IS/GS 2006-2020 Ultimate Angle kit
Will work for: 2006-2020
Package includes : Knuckles / tie rods (in/out) / Hardware set 12.9 grade
NOTE: PRE CUT BALL JOINTS are not included. You will have to cut your existing ball joints to fit.
Additional shipping charges apply to international order.
Built in RCA 20mm
4031 chromoly guide pins
CNC machined forged T6061 aluminum
Bump steer correction
Over 55 degrees of drift angle fun
Spindle is offset by 40mm.
Ackerman angle is at +5mm to replicate an OEM feel.
Easy/ Affordable/ Fun
Requirements to run my kit:
- Low off set wheels
-If using 18in wheels stick with a 35 series tire up front!
-If using 19in wheels stick with a 30 series tire up front!
Recommendations For is250/ 350 chassis
-front 18x9.5+22 with 225 35 18 or 245 34 18
-rear 18x10.5+22 with 255 35 18 with slight pull.
My current camber setting on my car:
-Front camber with my knuckles, without additional arms: -6
-Rear camber with toe and camber arms: 0
OFF ROAD USE ONLY! We are not responsible for any mishaps that may occur while using this product.