Pre Order Replacement V2.5 Knuckles

Pre Order a set of v2.5 for the IS and JZX chassis: Expected be ready to ship at the end of this month(MARCH21).
 
LS&GS v2.5 in stock
 
Package includes : Knuckles / Hardware set 12.9 grade 
 
*GS and LS chassis will have a price difference due to smaller production order.
 
*GS300 chassis: will need LS400 tie rod ends (Part#ES80291/ES80290) and will require inner tie rods (Part# EV179) 
 
*LS400 chassis will need LS400 tie rod ends (Part#ES80291/ES80290) and will require inner tie rods ( Part# EV800442) 
 
*IS300 chassis will need LS400 tie rod ends (Part#ES80291/ES80290) and will require inner tie rods (Part# EV198)
 
*IS300: you can also use these combos for tie rods
1) EV198 inners with ES80291/ES80290 
2) EV190 inners with ES800309/ES800310 (is300 outers)
 
!!! 3) OEM inners with ES800027/28 (2006 mazda 6) --> all 2021 models will be machined for this tie rod set up to reduce the amount of work required to bolt on. They will come with Mazda 6 tie rod ends!!!
 
JZX CHASSIS contact me for 2021 models so I can provide the correct inner tie rod partnumber for you!
*JZX chassis: EV257 inner tie rods with ES800309/ES800310 (is300 outers)
 
NOTE: PRE CUT BALL JOINTS are not included. You will have to cut your existing ball joints to fit.
 
Additional shipping charges apply to international order.
 
Specifications:
4130 chromoly guide pin inserts
Built in RCA
CNC machined forged T6061 aluminum
Bump steer correction
Over 65 degrees of drift angle fun
Lower control arm pushed out 32mm
+12mm caster to bring the tire closer to the front bumper (Avoid hitting the wheel well)
Ackerman angle has been changed from 0 to +10 to replicate an OEM feel.
Easy/ Affordable/ Fun
 
EZ Knuckles
Will work for:
is300/200 altezza
JZX 90/100/ 110
JZS 151/ 171
JZS 147/161 (GS300)
LS400 UCF10/11/20
 
Requirements to run my kit:
-adjustable coilovers
- Low off set wheels
- JZX chassis will need to use is300 outer tie rods!
-If using 18in wheels stick with a 35 series tire up front!
-If using 17in wheels stick with a 40 series tire up front!
 
Recommendations For is300/is200 chassis
Wheels:
-front 17x8+12
 
My current camber setting on my car:
-Front camber with my knuckles, without additional arms: -5
-Rear camber with toe and camber arms: 0
 
 
OFF ROAD USE ONLY! We are not responsible for any mishaps that may occur while using this product.
 
View our installation video and torque to spec.
Video link: https://www.youtube.com/watch?v=PthqUhzPEbk
 
Like/ Review/ Share